| Operational pressure (bar) | Flow rate from (l/h) | Flow rate to (l/h) |
| 100 | 42.000 | 66.000 |
|---|---|---|
| 130 | 40.000 | 62.000 |
| 150 | 34.000 | 54.000 |
| 180 | 28.000 | 45.000 |
| 200 | 26.000 | 40.000 |
| 230 | 24.000 | 35.000 |
| 250 | 22.000 | 32.000 |
| 300 | 18.000 | 27.000 |
-
Compression Head guaranteed 5 YEARS against breakage, made from a single block of special stainless steel, forged and ultrasonically inspected
-
Valve Units housed in individual stainless steel AISI 316 blocks, each individually inspectable
-
Plunger pistons with rear cooling chamber, optimal alignment with double guide, special coating (standard) over their entire length in “Diamond Like Carbon”
-
Interchangeable Valve Seats and Semi-spherical Valves designed to handle a vast range of products
-
Highly efficient homogenizing valves thanks to a design aimed at maximum stability/alignment of the mobile element (Impact Head) and the use of a hydraulic thrust group to prevent any potential vibration onset during operation
-
Safety valve in sanitary design, spring-loaded operation with interchangeable shutter and seat.
-
Pump Body made of high-quality cast iron with high resistance and thick walls, designed to withstand high loads and cancel operating vibrations
-
Crankshaft made from special forged steel, “multi-steep” heat treatments, super finishing on the necks, full nitriding with ultrasonic inspection. Supported by high-performance roller bearings (bushings are used exclusively on the necks) – 5 units for machines with 3 plunger pistons, 7 units for machines with 5 plunger pistons.
-
Motion transmission with double reduction stage: trapezoidal belts/pulleys with semi-automatic tensioning plus a pair of helical gears inside the pump body (slow gear directly keyed onto the Crankshaft)
-
Forced lubrication with oil level sight glass on the machine front, irregular pressure alarm, intense impurity filtration. Moreover, for optimal balance/thermal dissipation, all parts dedicated to motion transmission are oil immersed
-
Alternating current motor from a leading brand and standard 4 poles
-
Frame made with thick section square steel painted with powder; this solid structure is fully clad in stainless steel with a satin finish.
-
Set of first-use spare parts (full set of Seals, set of Valve group Springs, Safety Valve set)
-
Tools for regular maintenance
-
Pump Body lubrication oil
-
User-Manual (2 copies + CD ROM)
-
Double-stage homogenization servo-assisted type (oleopneumatic group)
-
Digital pressure transducers and analogue pressure gauges with 4-20 mA output signals
-
Fixed Flow Rate (internal machine control panel)
-
Variable Flow Rate (external stainless steel control panel)
-
Aseptic version through the use of sterile condensation barriers produced by a specific integrated system
-
Inlet/Outlet Product Compensation Tanks, also specific for aseptic productions
-
Product input pressure gauge with alarm contact, with timed management of deactivation-activation of homogenizing valves
-
Semi-automatic/automatic control of homogenization pressures.
*Non-binding and subject to change without notice technical specifications.
Download
Remote Homogenizing
Valve
Do you have a single-stage homogenizer and want to convert it into a two-stage homogenizer easily, quickly and inexpensively?
Thanks to the Remote Homogenizing Valve (VOD), which consists of a complete homogenizing chamber that can be operated independently of the existing homogenizer, it is possible to transform the single-stage homogenizer into a two-stage homogenizer.
This is made possible by a Remote Homogenizing Valve equipped with a single pressure gauge for reading the homogenizing pressure.
